1,87 m² | 6 mm | Noise and thermal insulation foam - Self Adhesive | 5 sheets of 50 x 75cm

6 mm Noise and thermal insulation foam - Self Adhesive

Thermo and heat insulating material based on foam rubber, has the properties of absorption and sound damping. It is very flexible, allowing the material to be used to treat difficult surfaces. The product is oil resistant and non-flammable, does not emit any toxic substances, so it can be used on almost all types of surfaces.

This product is recommended for using in doors or on the roof. It is best used together with a Sound Deadening Mat as a 2-layer solution to reduce and absorb airborne noise. 

It can also be used on speaker baffles and panels when an airtight seal is required. 

• Material composition: Polyethylene foam
• Heat resistant up to 85 ° C direct heat
• Dimensions: 5 sheets of 50 cm x 75 cm
• Thickness: 6 mm
• Water resistant & self adhesive
• Density: 65 ± 25 kg / m3
• Environmentally friendly: no asbestos; No CFC-HCFC
• Sound insulation DIN 4109: up to 36 dB (А)
• Thermal conductivity:
  0.034 W/mK at -20°C
  0.036 W/mK at 0°C
  0.048W/mk at 20°C
• Fire resistance Euroclass B,s3,d0 EN13501-1 (Europe), DIN4102 B1/DIN4102 Teil11 (Germany), M1 (Spain), NF-FEU487 (France), BS476Part6,7 (UK)

Typical uses of this product:

• Fitting to a vehicle side panels and roof to prevent road noise and help insulate the cabin.
• Lining panels, cupboards and doors at home to insulate and/or prevent noise transfer