How do I determine what size turbo blanket I need for my turbocharger?
- Posted on
- By Heat Shieldings - Floris
- Posted in garrett turbo, T25/28, T3, T4, T6, Turbo, Turbo blanket
- 3
Determine which size turbo blanket you need by doing 2 simple measurements!
Which size do you need?
T3, T25/T28, T4 and T6 are all very familiar names in the turbo industry.
The dimensions of the turbo blankets are based on 2 simple measurements.
- The first measurement is de circumference excluding the flange.
- The second measure is the width of the turbo at its widest point excluding the flanges.
| Turbo | Circumference | Width |
| T3 | 38 ~ 41cm | 5 cm |
| T25 / T28 | 38 ~ 41cm | 6 cm |
| T4 | 51 ~ 56cm | 7 cm |
| T6 | 66 cm | 9,5 cm |
Various types of Turbo Blankets
Heat Shieldings turbo blanket Carbon 1100°C
- Turbo blanket Carbon T3 €99,-
- Turbo blanket Carbon T25/28 €99,-
- Turbo blanket Carbon T4 €119,-
- Turbo blanket Carbon T6 €129,-
For the composition of this turbo blanket we have chosen the most extreme heat resistant materials to make a high-end product. This turbo cover can withstand 1100 ° C for a long period and is therefore our recommendation for high-performance applications. The turbo blanket is also reinforced on the inside and outside with stainless steel and kevlar stitching for a guarenteed long life.
Specifications
- Very high quality cover!
- Withstands up to 1100°C direct heat
- Carbon fiber on the outside
- Stainless steel eyes / stainless steel springs
- High-quality ceramic wool for insulation
- Silica fiber on the inside of the cover
- RVS mesh on the inside against mechanical wear
- Kevlar wire reinforced with stainless steel
- Cover is non-flammable
- Lightweight and moldable to the turbo
Turbo blanket Titanium T3 €85,-Heat Shieldings turbo blanket Titanium - 975°C
Specifications
- Very high quality cover - max temp - 975°C
- Titanium fiber on the outside
- Stainless steel eyes / stainless steel springs
- High-quality ceramic wool for insulation
- Silica fiber on the inside of the cover
- Kevlar wire reinforced with stainless steel
- Cover is non-flammable
- Lightweight and moldable to the turbo
Heat Shieldings turbo blanket Basic 600°C
Specifications
- Silicone Impregnated Fiberglass (Outer)
- Stainless Steel Capstan Rivets
- Stainless Steel Lacing Wire Fastening
- Calcium Magnesium Silicate Wool (Inside)
Dear Takeshi, because there are so many types we do not have a standard list available. We hope to have this in the future. For now the only solution is to measure the turbo according to the instructions in this article.
TD06-20G Turbine, please tell me the compatible size of the heat cover
TD06-20G Turbine, please tell me the compatible size of the heat cover