Heat-resistant spray adhesive offers strong adhesion on a wide variety of materials such as metals, PVC, foams, fabrics, wood, and much more. The spray adhesive dries quickly and clear, forming a water-resistant layer. The adhesive can withstand temperatures of up to 175°C and is supplied in a convenient 0.5L spray bottle.
A 0.5L bottle is suitable for applying approximately 8 m² of spray adhesive. Please note that we recommend spraying both the base and the insulation layer before applying. Thus, one spray can is suitable for 4 m² of insulation.
The Thermo-tec heat-resistant spray adhesive is ideal for mounting insulation without its adhesive layer.
• SHAKE WELL BEFORE USING. Spray adhesive works best at room temperature on clean, dry surfaces. • TO SPRAY: Hold the can at a distance of 10 to 20 centimeters (4 to 8 inches) from the surface. Press the spray button firmly.
• Apply an even coat to both surfaces. Use two coats for an extra strong bond.
• Allow the adhesive to dry for at least one minute until it becomes tacky. The tack time is 1 - 8 minutes. Position and bond surfaces while they are still tacky.
• Occasionally during use and after spraying, clean the buildup from the spray tip, then hold the can upside down and spray for 2-4 seconds to prevent the can from clogging. The spray tip and can may be cleaned with solvent. Test non-metallic materials for compatibility.
Prima spul. Makkelijk in gebruik, even corrigeerbaar en vervolgens zit alles vast op zijn plek.
moet het product nog gaan gebruiken
Lijmt geweldig