Product information Heat resistant tape aluminum
Use aluminum tape to close the cracks perfectly or to prevent fraying after cutting fiberglass mats. As a result, there is no heat loss and you maintain the efficiency of your insulation materials. The tape is lightweight and easy to apply with the special high temperature resistant adhesive side. The aluminum tape is protected against tearing by an underlying grid of glass fibers.
Reflects up to 90% radiant heat
Fire resistant in accordance with the DIN 4101B1 standard
0.075 mm thick aluminum tape with synthetic rubber adhesive
adhesive strength: 20 N / 25mm
temperature resistant from -30 ° to + 120 ° directe hitte
Radiant heat 400C°
pulling force: 37.5 N / 25mm
PAY ATTENTION! This tape cannot be applied directly to the exhaust system.
For more information about Heat resistant tape aluminum please contact us
|Material||Fiberglass, Adhesive, Aluminum|
|Max. direct heat | °C||120|
|Max. Radiant Heat | °C||400|
|Heat conductivity coefficient (λ value) | W/(mK)|
|Thickness | mm||0.075|
|Length | cm||5000|
|Width | cm||7.5|
Hard nodig voor mijn werk. Bevalt goed!